Joshua

The screw machine system is a speed control with very high requirements, a mechanical device that is capable of providing a very accurate and smooth linear speed. The screw machine is used for ordinary plastic nail roll machine to pull gold wire for higher requirements. The whole system is more complex, controlling the equipment, requiring coordination between the various motors. The system adopts four servo motors to control, supported by servo bus communication, which fully satisfies the real-time interaction between the data between each set of real-time data exchange between the servos.
The need for fast motor axes to interact between the system view, in order to Nail Making Machine manufacturers ensure that the line of the line can be calculated quickly in accordance with the algorithm of the orbital side line, we also make full use of the servo internal firmware function, by the calculation of the drive itself, the self-driven motor line, greatly omitting the position of the line line of the traditional screw machine control system to calculate, and then due to the time delay sent to the drive, to ensure that the line line to minimize the delay through the controller.
Pull head of the continuous production equipment, by gradually drawing by multiple composition of the screw machine, disposable cold drawing steel wire, copper wire, wire, etc. required specifications, and finished wire winding work efficiency is relatively high, equipment covers an area of the nail machine is made of several parts of the wire release, drawing, water cooling, wire and cable, including electric drive is mainly by the actinomycete motor cable wire motor motor, to achieve its production quality and efficiency is crucial for enterprises. The screw machine, mainly by some basic steps to put the wire drawing process of the line, the accuracy requirements are not too high the entire link, the screw machine, the plastic screw machine control, mechanical drawing, the decision of the line operation inverter to drive the line release frame, but there are also some double frequency control of the mechanical drawing, and even directly send the drawing link line tension draft screw machine, to achieve free release, the wire drawing link is the most important aspect, our work pulling machine.
Requirements for the use of the screw reel machine
(1) The installation foundation of the screw reel machine needs to be very stable to avoid vibration;
(2) When installing, the tensile wire nail machine manufacturers axis of the wire should be symmetrical with the center line of the die hole through debugging, so that the stress of the wire rod and the pulling die should be uniform;
(3) Avoid frequent start and stop during the pulling process, because the friction caused by the tensile stress at the start of the pulling is much greater than the friction during normal pulling, which is bound to increase the wear of the mold.
The top bar of the roll nail is handled with threads, rings, light rods, etc., the light rod is easy to remove, the thread is used to tighten the connection of hardwood, and the ring pattern is suitable for the connection of cork. The surface treatment of the roll nails is divided into impregnated paint, galvanizing, colored zinc plating, dacromet, etc., the domestic generally only use impregnation paint, whether the impregnation paint is uniform on lubrication, fastening, rust prevention and so on has a very large impact. The nail head of the roll nail has a pointed head, a blunt head, a chisel tip, a blunt chisel, etc., which is determined according to the hardness and toughness of the material.
Most screw gun users mistakenly believe that the sharper the nail, the better, this concept is wrong, any nail has its special use occasion, should be determined according to the specific situation, which has Nail machine manufacturer a certain relationship with the nail gun and the material. The matching of the nail gun and the roll nail must be good, and when choosing the nail, we must first look at whether the nail gun used is compatible with the nail.
The welding wire of the coil nail is very important, the hardness and toughness of the welding wire are just right, the appearance of the solder joint is clean, and the poor welding wire is easy to deform and easy to break in use, causing jams. The welding wire of the coil nail is very important, the hardness and toughness of the welding wire are just right, the appearance of the solder joint is clean, and the poor welding wire is easy to deform and easy to break in use, causing jams.